Front suspension
  • Double steel wishbones, pushrod operated, twin dampers and torsion bars suspension.
  • Adjustable ride height, cambers and toe.
  • Two way adjustable Koni dampers.
  • Adjustable anti-roll bar.
Monocoque and Bodywork
  • Survival cell – Sandwich Carbon/aluminium honeycomb structure made by Dallara.
  • Front and rear wing – Carbon structures made by Dallara
  • Bodywork - Carbon – Kevlar honeycomb structures made by Dallara
Steering system
  • Non assisted rack and pinion steering system.
  • XAP steering wheel with dashboard, marshalling display, gear change and clutch paddles.
Brakes
  • 6 pistons monobloc Brembo callipers.
  • Hitco carbon-carbon brake discs and pads.
Fuel cell
  • FIA Standard.
  • Premier FT5 125 litres.
Engine
  • Designed by Renault – Assembled, maintained and rebuilt by Mecachrome
  • V8 – 4 litre atmospheric – 600 HP @ 10.000 rpm.
  • 8 in 1 exhaust.
  • Fly by wire accelerator system.
  • Rebuild after 4000 to 4500 km.
Gearbox
  • 6 speed longitudinal sequential gearbox.
  • Electro-hydraulic command via paddle shift from steering wheel.
  • AP Carbon clutch.
  • No on-board starter, anti stall system.
  • Non hydraulic ramp differential.
Electronic features
  • Magneti Marelli Marvel 8 ECU/GCU including data logging system.
  • XAP power supply management unit.
  • CAN data acquisition pre-equipment.
  • F1 EM motorsport Marshalling system.
  • Beacon receiver.
Rear suspension
  • Double steel wishbones, pushrod operated, twin dampers and spring suspension.
  • Adjustable ride height, cambers and toe.
  • Four way adjustable Koni dampers.
  • Adjustable anti-roll bar.
Wheels and Tyres
  • F1 standard wheel dimensions
  • OZ magnesium rims
  • GP2 series specific Bridgestone slick tyres.
Safety standards
  • FIA F1 safety standards including
  • Front, side, rear and steering column impact tests.
  • Front and rear roll hoop, impact structures and monocoque push tests.
  • Anti-intrusion survival cell protection panels.
  • Wheel retainer safety cables.
Camera equipment
  • Roll hoop, nose cone and face shot camera pre-equipment.
Dimensions
  • Overall length 4867 mm
  • Overall width 1805 mm (bodywork 1500 mm)
  • Overall height 1047 mm (including FOM roll hoop camera)
  • Wheelbase  3120 mm
  • Overall weight  688 kg (driver on-board)
Performances
  • Acceleration 0 - 100 km/h 2.90 sec.
  • Acceleration 0 – 200 km/h 6.60 sec
  • Maximum speed   328 km/h (Monza aero configuration)
  • Max. braking deceleration  -3.5 G
  • Max. lateral acceleration +/- 3.6 G